=====================================================================


                         KM-NET VIEWER


=====================================================================

[0. Table of Contents]

  1. Main Features of the Applications
  2. Operating System Requirements and Notes for Installation
     2-1.  Windows 2000, XP, Server 2003
     2-2.  Windows XP x64 Edition, Windows Server 2003 x64 Edition, Windows Vista
  3. Frequently Asked Questions
  4. Kyocera home page
  5. Supplement



[1. Main Features of the Applications]

  This application provides a wide range of management of the printing
  systems.



[2. Operating System Requirements and Notes for Installation]

  - Please update your operating system with the latest Service Pack 
    in order to maintain reliability.
  - With some printing systems,  this application is unable to communicate 
    via LPT port.


  2-1.  For the Microsoft Windows 2000, Windows XP, or Windows Server 2003 operating systems

  - Administrator rights are required for installation.

   <Notes when connected to USB or LPT>
    - If you are connected via USB or LPT, please verify that a
      Kyocera KX driver has previously been installed.
      The application cannot be used if a Kyocera KX driver has not 
      been installed. 

   <Notes when connected to network>
    - Please verify that TCP/IP or the IPX protocol is installed.
    - You cannot print or delete jobs with an IPX connection.
      IPX will only display the list of jobs.


  2-2.  For the Windows XP x64 Edition, Windows Server 2003 x64 Edition, 
        or Windows Vista operating system

  - Administrator rights are required for installation.
    To install the software, right-click setup.exe and 
    click "Run As Administrator".

   <Notes when connected to USB or LPT>
    - If you are connected via USB or LPT, please verify that a
      Kyocera KX driver has previously been installed. 
      The application cannot be used if a Kyocera KX driver has not 
      been installed. 

   <Notes when connected to network>
    - Please verify TCP/IP or IPX protocol is installed.
    - You cannot print or delete jobs with an IPX connection.
      IPX will only display the list of jobs.



[3. Frequently Asked Questions]

    Q: Cannot open the application.

    A1: Are you using an older version of Microsoft Internet Explorer?
        If so, please update to Microsoft Internet Explorer to 5.5 or
        higher.

    A2: The software does not support the following operating systems:
        Windows 95, 95 OSR2, 98, 98 SE, Me, and Windows NT 4.

    A3: This application may have failed to install.
        The application may not have been installed properly.
        Delete this application by using
        Microsoft's Windows Installer Clean Up utility 
        and retry installing the application.
        (Microsoft Knowledge Base article ID : 290301)


    Q: Cannot connect to printing system.

    A1: If the printing system is connected to USB or LPT:

        The Kyocera KX driver must be installed.
        With some printing systems, this application is unable 
        to communicate via the LPT port.
        The software may fail to communicate with the printing system 
        via USB or LPT if the printing system is processing a job.

    A2: If the printing system is connected to a network:

        When connecting a printing system to a network, the TCP/IP or IPX 
        protocol needs to be installed.



[4. Kyocera home page]

    http://www.kyoceramita.com



[5. Supplement]

    Company and product names shown are the trademarks or registered 
    trademarks.



================================================================================
		Copyright  2001 KYOCERA Corporation
		Copyright  2007 Revised Edition KYOCERA MITA Corporation
		All Rights Reserved.
